If You Love Miniatures You’ll Love This Greenhouse
If you love miniatures you’ll love this greenhouse.
Today I am showing you step-by-step tutorial on how to assemble one of our DIY Greenhouse Kits.
We send you everything you need (minus the glue) to construct the miniature dollhouse greenhouse of yoour dreams.
Oour goal with our DIY kits is to keep our products simple and easy to put together.
So let’s get started.
Disclosure: Some of the links in this post are affiliate links, meaning, at no additional cost to you, I will earn a commission if you click through and make a purchase, which allows me to provide all of this content to you for free.
Supplies
I prefer to use super glue (Loctite Super Glue Gel Control) when assembling walls, but this is totally your choice.
If you go with wood glue (We recommend Gorilla Glue) be sure to use the painters tape to hold the parts in place for a few hours until everything dries.
We recommend painting or staining beforehand. The stain we used in the Minwax Wood Finish Penetrating Stain, Early American. For paint we recommend either Waverly chalk paint, or Heirloom White General Purpose Spray Paint.
Assembly
With just 6 pieces, 7 if you have a floor this DIY kit is a breeze.
STEP #1: The Main Walls
The first step is to atach your longer main walls.
Lay your side wall flat, and add super glue or wood glue along the edge.
Then place the larger wall on top of the smaller wall not along side.
Hold until dry or attach painters tape and move on to the other wall.
Rotate and do the same thing on the other wall.
Next Step: Side Wall
You will only have one side wall to attach.
Run the glue along side each side of the longer wall that is already attached.
Simply place the side wall on top and hold in place.
Final Step: Roof
Your final step is to attach the roof.
Apply glue along the eintire roof.
Place each side of the roof leaving small gap at the top.
Finished Version
If you have a floor you can choose to assemble the walls on the flooring at the start or place entire greenhouse on floor at the end.
I chose to leave the floor unattached so I can remove structure to move items around my greenhouse.
That is totally up to you.
I hope you enjoyed our tutorial on “If You Love Miniatures You’ll Love This Greenhouse” be sure to check out how we make all these amazing items on our new Thunder Laser!
I would love for you to follow us on Instagram, Pinterest, TikTok, and Facebook! You can also join our email list so you don’t miss any fun blog posts or designing spaces.
